People at many forums often complain of problems with display of E71.
It's when image is becoming inverse, iridescent or noisy, periodically coming back to normal.
Now, we've got the reason! Display's binding to plane is not rigid and that's why the flex is going to break.
First of all, don't ask me anything and remember: you do it at your own risk!
It's necessary to have T5-screwdriver. Otherwise, you'll damage bolts and lose guarantee.
Accurately press latches using screwdriver to set the display free.
Socket of the display. There are rubbing details on picture below.
on this bend
Further we need something not so soft and not so rigid, like finely porous foam-rubber.
Cut out slices at a height about 1.5-2 mm, and place them as shown below.
Paste a piece of an adhesive tape on a details near the socket.
The flex contacts with them too.
Well, that's all
When you latched the display, it will sit reliably.
If the display could not latch, it means foam-rubber linings are too high\rigid.
The main thing is to do all accurately without superfluous force.
© Sotaland, 2007
Translated by Sim (sim_emrom), version of translation: 1.0